4 1/2" x 7" Finned 2BBL Rectangular

We've been making these air cleaners for so long that we now have eleven different parts to combine (and that's not including the Barry Grant Six Shooter, Ford/Chevy/Mopar "D" shaped Holleys or GM TPI's.) Here are the groupings:

Covers: Widthwise fins for set screw or center hole mounting and Lengthwise for set screw mounting. The widthwise covers work great with two or three carb set ups and the lengthwise fins work well where the carbs are spaced far apart like on multi-carb six cylinder engines.

Elements: Cotton gauze washable lifetime elements in either short 1 3/4" or tall 2 1/2" heights. (Overall heights are 3 1/2" and 4 1/4" respectively.) The tall elements are recommended for better breathing and the short elements are useful where there is a hood clearance issue.

Bases: Round air horn sizes of 2 5/16" for 1 BBL's, 2 5/8" set screw or center hole bases for 2 BBL's and 3 1/8" set screw or center hole bases for 2 BBL's. The set screw bases are for early carbs with no provision for a center stud like the Stromberg, Holley, Chandler Grove, 48, 81, 94, 97, etc. carbs. The center hole mounting style is highly recommended for Rochester carbs which have a very short air horn lip that doesn't provide enough meat for a set screw to get a good bite or any other carb that has a center stud. We also offer a base with no opening for those who are doing a custom application or are mounting our air cleaners on one of the many different Weber and Mikuni 2 BBL carbs.

NOTE: If you buy in multiples of three the price for these air cleaners is 3 for $175 - call us before ordering so that you are charged the correct price.